Optsigns Rubber Wheel Stop هو الحل المثالي للسيارات لأي بيئة. مصمم لسهولة التثبيت على كل من الأسطح الإسفلت والخرسانة, تتوقف هذه العجلة المتينة بشكل فعال تحمي الجدران, المباني, الأرصفة, والقيود من الأضرار المحتملة. مثالي لمجموعة متنوعة من الإعدادات, بما في ذلك مواقف السيارات, المرائب, المستودعات, المصانع, ومناطق وقوف السيارات الأخرى, تضمن توقف عجلة المطاط لدينا موقفًا آمنًا وفعالًا للسيارات مع منع الإصلاحات المكلفة.
*نحن نحترم سريتك وجميع المعلومات محمية.
| مقاس | 1830*150*100مم |
|---|---|
| وزن | 16كلغ |
| مادة | المطاط مع سطح منقط |
| العاكس | 10 شرائط عاكسة صفراء (4 الجانبين) |
يعد إيقاف OptsIsns لعجلة السيارة واضحًا وفعالًا. ابدأ باختيار موقع مناسب في منطقة وقوف السيارات الخاصة بك, ضمان محاذاة مع مساحة وقوف السيارات المطلوبة. التالي, ضع عجلة السيارة تتوقف بشكل آمن ضد الرصيف أو الجدار, التأكد من أنها مستوية ومستقرة. للحصول على النتائج المثلى, اربط توقف عجلة السيارة إلى الأسفلت أو سطح الخرسانة باستخدام المراسي أو البراغي المناسبة. سيمنع هذا الحركة ويوفر حماية موثوقة لمنطقة وقوف السيارات الخاصة بك. مرة واحدة تثبيت, ستقوم توقف عجلة السيارة بتوجيه المركبات بشكل فعال إلى مواقع وقوف السيارات المناسبة, حماية الهياكل المحيطة وتقليل الأضرار المحتملة.
نوع 1 barricade is a traffic control device used to warn or direct traffic in temporary work zones, إغلاق الطرق, أو مناطق البناء. It features a single reflective panel (usually orange or white) mounted on a lightweight frame. يكتب 1 barricades are designed for low to moderate traffic areas and are often used for shorter-term applications.
النوع الأول حاجز
تصميم: A lightweight, foldable barricade with one reflective panel, suitable for low-traffic areas.
طلب: Often used in urban or short-term construction zones.
النوع الثاني حاجز
تصميم: A larger, more robust barricade with two reflective panels, providing greater visibility.
طلب: Commonly used for moderate traffic control in construction sites and road work.
النوع الثالث حاجز
تصميم: The largest barricade, typically with three reflective panels, providing maximum visibility.
طلب: Used in high-traffic areas or hazardous zones where maximum warning is needed.
إدارة السلامة والصحة المهنية (إدارة السلامة والصحة المهنية) sets standards for barricades used in construction and industrial settings to ensure worker safety. OSHA standards for barricades are outlined in 29 CFR 1926.200 and state that:
Barricades must be visible and clearly mark hazards to prevent accidents or unauthorized access.
The barricade must have high-visibility materials, such as reflective sheeting, and be designed to withstand environmental conditions.
Barricades must be stable enough to remain upright and prevent injury if struck by vehicles or equipment.
OSHA regulations require that warning barricades are properly maintained and positioned to protect both workers and the public.
While stable under normal conditions, sandbags or weights can be added for extra stability in windy environments.
