When planning traffic sign projects, you need accurate numbers for material weight. أ standard 4×8 sheet of aluminum at 1/8 بوصة (0.125″ ≈ 3.2 مم) thickness weighs about 56.16 جنيه (25.47 kilograms). Knowing these values helps you estimate shipping costs, labor requirements, and installation planning.
| سماكة | وزن (رطل) | وزن (كجم) |
|---|---|---|
| 1/8″ | 56.16 | 25.47 |
وفق FHWA MUTCD guidelines و ASTM B209 specifications, proper weight and thickness selection is essential for safety, امتثال, and cost-effective project delivery.
4×8 Aluminum Sheet Weight Table
4×8 Sheet of Aluminum: Common Thicknesses
In the signage industry, the most common aluminum sheet thicknesses are:
| سماكة (بوصة) | سماكة (مم) | استخدام نموذجي |
|---|---|---|
| .040″ | 1.0 مم | Temporary or private property signs (not MUTCD-compliant) |
| .063″ | 1.6 مم | Light-duty signs, مواقف السيارات, استخدام قصير الأجل |
| .080″ | 2.0 مم | MUTCD-compliant regulatory and parking signs |
| .125″ | 3.2 مم | Large highway guide signs, high-wind zones |
| 1/4″ | 6.4 مم | Specialized heavy-duty installations |
👉 ملحوظة: Thicknesses greater than .125″ are rarely specified for road signage and are generally reserved for structural or specialty applications.
Weight per Square Foot
The following table shows the weight of standard 4×8 aluminum sheets at various thicknesses. Data is based on ASTM B209 density (0.0975 LB/in³).
| سماكة (بوصة) | Weight of 4×8 Sheet (lb) | وزن (كجم) | Weight per sq ft (lb/sq ft) |
|---|---|---|---|
| .040″ | 18.7 | 8.5 | 0.59 |
| .063″ | 29.5 | 13.4 | 0.93 |
| .080″ | 37.6 | 17.1 | 1.18 |
| .125″ | 56.2 | 25.5 | 1.77 |
| 1/4″ | 112.4 | 51.0 | 3.52 |
نصيحة: To calculate the weight of any sign, multiply the weight per square foot بواسطة total sign area.
مثال: أ 2′×2′ sign at .080″ thickness = 4 sq ft × 1.18 lb/sq ft = 4.7 رطل.
4×8 ورقة الألومنيوم: Weight Calculation
Weight Formula for Aluminum Sheets
You can calculate the weight of any aluminum sheet with a simple formula used across the signage industry:
Weight = Length × Width × Thickness × Density
- Length × Width: dimensions of the sheet (بوصة)
- سماكة: material thickness (بوصة)
- Density of aluminum: ~0.0975 lb/in³ (ASTM B209 standard value)
👉 مثال: A 24″ × 36″ sign at .080″ thickness weighs:
24 × 36 × 0.080 × 0.0975 ≈ 5.3 رطل (2.4 كجم).
This formula is especially helpful when ordering custom sizes or estimating freight loads.
Step-by-Step Weight Calculation
To verify, here’s how to calculate the weight of a 4×8 sheet at 1/8″ thickness:
وزن: Volume × Density = 576 × 0.0975 ≈ 56.16 رطل
Density of aluminum: 0.0975 LB/in³
Convert dimensions to inches: 4′×8′ = 48″ × 96″
Area: 48 × 96 = 4,608 in²
Volume: Area × Thickness = 4,608 × 0.125 = 576 in³
This aligns with standard supplier data.
Why Weight Matters for Traffic Signage
مواصلات & تثبيت
When you plan a traffic sign project, you must think about the weight of aluminum sheets. The weight changes how you ship and install them. Heavy sheets cost more to move. Shipping companies charge by weight, so knowing the weight helps you avoid extra costs. You need to be careful with heavy sheets. More weight means you might need more workers or special tools to lift and put up the signs safely.
Here is a quick look at how weight changes transportation costs:
| عامل | Impact on Transportation Costs |
|---|---|
| Weight Calculation | Needed to figure out shipping costs |
| Safe Handling | Heavy sheets need more care when moving |
| Cost Estimation | Suppliers may charge more for heavier materials |
| Project Planning | Total weight changes how you plan and schedule |
الاختيار aluminum helps the environment. يزن الألومنيوم أقل من الصلب, so trucks use less fuel and make less pollution. Even a small drop in weight can save money and lower pollution. علامات الألومنيوم last a long time and can be recycled many times, so less trash goes to landfills.
- Aluminum is lighter than steel, so trucks use less fuel.
- Cutting weight by 10% can save 6-8% on fuel.
- Aluminum can be recycled and stays strong.
- Aluminum signs last longer and do not need to be replaced often.
عندما تضع علامات, the weight decides what hardware you need. Lighter sheets can use simple mounting, like VHB tape or angle aluminum. Heavy sheets may need lead anchors or masonry screws for extra support.
| طريقة التثبيت | وصف |
|---|---|
| VHB Tape | Stick the sign to the frame with VHB tape so screws do not show. |
| Lead Anchors | Put lead anchors in the corners and add supports in the middle. |
| Masonry Screws | Use masonry screws with washers, painted to match the sign. |
| Angle Aluminum | For light signs, use angle aluminum glued with countersunk screws. |
متانة & يكلف
Thicker sheets provide greater طول العمر, مقاومة الرياح, and vandal resistance.
| سماكة | الآثار المترتبة على التكلفة | متانة |
|---|---|---|
| .040″ | Lower upfront cost | على المدى القصير, not MUTCD-compliant |
| .080″ | Standard cost | متوافق مع MUTCD, 10+ years outdoor life |
| .125″ | تكلفة أعلى | Maximum strength for highways and coastal environments |
👉 Case in Point: Florida DOT specifies .125″ 5052-H38 aluminum for large guide signs due to coastal wind and salt exposure, while Texas DOT commonly uses .080″ للعلامات التنظيمية.
If you want to save money now, you might pick a thin sheet. If you want your sign to last longer and handle tough weather, a thick sheet is better. You should think about your budget and how strong you need your sign to be. By knowing the weight and thickness, you can make smart choices for your traffic sign project.
Other Sheet Sizes for Signage
Not every project requires a full 4×8 sheet. Common cut sizes include 18″×24″, 24″×36″, and 24″×48″, which are lighter and easier to install.
| Sheet Size | سماكة | وزن (رطل) | استخدام نموذجي |
|---|---|---|---|
| 18″×24″ | .080″ | 3.5 | Parking signs |
| 24″×36″ | .080″ | 5.3 | Street name signs |
| 24″×48″ | .080″ | 7.1 | العلامات التنظيمية |
نصيحة: Standardizing sign sizes reduces costs and simplifies storage.
Choosing the Right Alloy
Different aluminum alloys affect both weight and performance:
| سبيكة | كثافة (ز/سم) | الخصائص الرئيسية | الأفضل ل |
|---|---|---|---|
| 5052-H38 | 2.68 | High corrosion resistance | Coastal/highway signs |
| 6061-T6 | 2.70 | قوة عالية, less formable | Overhead/structural signs |
| 3003-H18 | 2.73 | فعالة من حيث التكلفة, المتانة الجيدة | Street & علامات التحذير |
👉 ملحوظة: Most traffic signs in the U.S. يستخدم 5052-H38 or 6061-T6, in compliance with ASTM B209.
خاتمة
Knowing the weight of a 4×8 aluminum sheet at different thicknesses is essential for estimating shipping, تثبيت, والامتثال. Whether you are building parking signs, highway guide signs, or municipal signage, choosing the right thickness and alloy ensures safety, متانة, and cost efficiency.
في أوبترافيك, we supply 4×8 aluminum sheets manufactured to ASTM B209 and MUTCD standards, with options from .040″ to .125″ thickness. Our bulk ordering program helps contractors, البلديات, and exporters reduce costs while maintaining quality. Explore our aluminum sheet products.
التعليمات
What is the MUTCD standard thickness for traffic signs?
Most regulatory and parking signs require .080″ aluminum. Large guide signs may need .125″. Thinner sheets like .040″ are used only for temporary or private property signs.
How do you calculate the weight of any aluminum sheet?
Use the formula: Length × Width × Thickness × Density (0.0975 LB/in³). على سبيل المثال, a 24″×36″ sign at .080″ weighs ~5.3 lbs.
Does aluminum weight affect transportation costs compared to steel?
نعم. Aluminum weighs about one-third of steel, lowering freight costs and fuel consumption by up to 8% for every 10% weight reduction.
Can you use aluminum composite panels instead of solid sheets?
نعم. Aluminum Composite Material (ACM) panels weigh less than solid aluminum and are easier to install, though MUTCD may still require solid sheets for certain regulatory signs.
